Country-Specific Approval For Wi-Fi Device - Hach Met One 6000 Series User Manual

1 No probe in non-laminar air flow
2 To particle counter

2.6 Country-specific approval for Wi-Fi device

Figure 4 Isokinetic probe function
Warning
Hach Company and its vendors disclaim any responsibility of providing network
and access point security with the purchase, installation and operation of its
wireless air particle counters. Network and access point security is the sole
responsibility of the customer using the wireless particle counters. Hach Company
and its vendors will not be liable for any indirect, special, incidental or
consequential damages caused by the breach in network security even if Hach
Company or its vendors has been given advanced notice of the possibility of such
damages.
Products with the wireless option contain a Wi-Fi device operating in the 2.4Ghz range.
The Antenna used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operated in conjunction
with any other antenna or transmitters.
Products with the wireless option contain a Modular RF Device within
FCC ID: R68WIPORT
IC ID: 3867A-WIPORT
3 No probe in laminar air flow—particles are missed
4 Isokinetic probe in laminar air flow—most accurate
General information
9