Table of Contents
Advertisement
Operation
4.3.1.4 Network configuration
4.3.1.5 Wireless LED indicators
40
Figure 28 LAN setup for Ethernet units
Error messages
If an error message such as "Invalid IP setting" is shown, refer to
values that can be used. Enter a value in the range for the setting.
Refer to
Table 13
for a description of the Ethernet connection LED indicators.
LED color
On/Off
Green
On
Yellow
On
Table 13 LED indicators for wireless
Indicator
Internal instrument Ethernet Link is established
Wireless communication is enabled. Occasional blinking indicates
data transfer. High rates of blinking may occur if a Wireless LAN
cannot be found, or the Wireless settings are incorrect.
Table 11
to find the
Advertisement
Table of Contents
