Table of Contents
Advertisement
Installation
3.2 Installation overview
1
To vacuum pump
2
Connector for power and communications
12
The tasks that follow are necessary to install the particle counter (refer to
1. Install the counter on a flat surface or a wall
2. Install the vacuum tubing
3. Install the sample probe and tubing
4. Install the wires for power and communications
Figure 6 Installation overview
(section 3.4.1 on page
(section 3.4.2 on page
14)
(section 3.4.3 on page
(section 3.6 on page
3
Isokinetic probe—direct mount
Figure
6):
13)
16)
18)
Advertisement
Table of Contents
