Table of Contents
Advertisement
Table 6. BIOS Setup Advanced Screen Menu Items.
Primary
Menu Item
Menu Item
Event Log
Event Logging
Configuration
Enable BERR
Enable SERR
Enable PERR
Enable BINIT
Enable HostBus
DATA ERROR
Enable HostBus
ADDR PARITY
Clear All MCA Error
Record
Table 7. BIOS Setup Security Screen Menu Items.
Menu Item
Administrator Password Is
User Password Is
Set Admin Password
Set User Password
Sub
Value
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Disabled]
Enabled
Security
Table 7 describes the menu items available on the Security screen. Default values
appear in brackets.
Default Value
[Not Installed]
Installed
[Not Installed]
Installed
N/A
N/A
Note: The BIOS Setup Security Screen Menu allows for User and Administrative
passwords to be created. The maximum length of the User and Administrative
Enabled allows logging of system events.
Enable/disable BERR event generation.
Enable/disable SERR event generation
.Enable/disable PERR event generation.
Enable/disable BINIT event generation.
Enable/disable Data Error checking in the processor.
Enable/disable Address Parity checking in the processor.
Enabled will clear MCA Error Records logged in the NVRAM.
The current administrator password. To set the administrator
password, use the Set Administrator Password menu item.
The current user password. To set the user password, use the Set
User Password menu item. The value will display "Installed" if a
password was entered.
Clicking this menu item displays a dialog box in which you can
define the administrator password.
Clicking this menu item displays a dialog box in which you can
define the user password. Setting a password in this menu item
will allow you to set up security features such as Inactivity Timer,
Security Hot Key, Clear User Password, Unattended Start and
Video Blanking.
Description
Description
Configuration
95
Advertisement
Table of Contents
