Scsi Test Error Codes - IBM xSeries 380 Hardware Maintenance Manual

SCSI test error codes

Code/Explanation
0500h SCSI device not ready
0502h SCSI device read error
0504h SCSI device write error
0505h SCSI disk format failed
0506h SCSI disk self test failed
0507h SCSI disk buffer error
0508h SCSI disk random read error 1.
0509h SCSI disk random write
error
050Ah SCSI disk block repair
failed
FRU/Action
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
239
Symptom-to-FRU index