Table of Contents
Advertisement
7.
Loosen the two captive screws securing the Processor Baseboard between the two
halves of the Processor/Memory Complex ( 1 ).
Open the four plastic latches ( 2 ) that secure the two halves of the
8.
Processor/Memory Complex together and lift the top half up and remove.
9.
Position the bottom half of the Processor/Memory Complex as shown above.
10. Lift the Processor Baseboard free of the Processor/Memory Complex and place on
a clean ESD-protected work surface.
FRU information (service only)
193
Advertisement
Table of Contents
