IBM xSeries 380 Hardware Maintenance Manual page 121

Error Type (signal)
Host Bus ASZ (BINIT)
Host Bus XBINIT (BINIT)
Host Bus SBE (CMCI)
Host Bus MBE (BERR)
PCI Expander Bus Parity
(SERR)
PCI Inbound Delayd
Timeout
PCI Addr Parity (SERR)
PCI Data Parity (SERR)
PCI PERR (PERR)
PCI DPE (PERR)
PCI RTA
PCI RMA
PCI SSE (SERR)
PCI PE (Parity Error)
OEM System Boot Event
There are two sensor types in the previous table:
1. Sensor type "0C" for memory which includes Single Bit Errors (SBE) and Multi-Bit
Errors (MBE).
2. Sensor type '13' for PCI related errors.
Interpretation of SEL format for memory related errors: The following table defines
the data byte formats for memory-related errors logged by the BIOS.
SEL Event Log Format (Generator ID, Msg Rev, Sensor Type,
Sensor #, EvDirEv Type, variable data bytes 1, 2, 3)
0x31, 0x03, 0x13, 0x05, 0x6F, Data1=0xA8, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x06, 0x6F, Data1=0xA8, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x09, 0x6F, Data1=0xA7, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0A, 0x6F, Data1=0xA8, BUS #=Data2, DEV#
= Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0B, 0x6F, Data1=0xA1, BUS #=Data2, DEV#
= Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0C, 0x6F, Data1=0xA5, BUS #=Data2, DEV#
= Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0D, 0x6F, Data1=0xA4, BUS #=Data2, DEV#
= Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0E, 0x6F, Data1=0xA4, BUS #=Data2, DEV#
= Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x0F, 0x6F, Data1=0xA4, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x10, 0x6F, Data1=0xA4, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x11, 0x6F, Data1=0xA7, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x12, 0x6F, Data1=0xA7, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x13, 0x6F, Data1=0xA5, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x31, 0x03, 0x13, 0x14, 0x6F, Data1=0xA4, BUS #=Data2, DEV# =
Data3[Bit7-3], FUN#=Data3[2-0]
0x01, 0x03, 0x12, 0x08, 0x6F, Data1=0x01, Data2=0xFF,
Data3=0xFF
111
Configur ation