Forward-Facing Latch: Lower Anchor + Top Tether Install - Maxi-Cosi Magellan LiftFit Manual

All-in-one car seat
Table of Contents

Advertisement

Forward-Facing
Anchor Belt
Before you begin installing the car seat
into your vehicle, did you check:
Your child's weight and height? See page 39.
Your child's fit? See page 12.
WARNING:
DO NOT use the lower anchors of the child restraint
anchorage system (LATCH system) to attach this child
restraint when restraining a child weighing more than
40 lb (18 kg).
IMPORTANT!
DO NOT use the AutoLock when installing
with LATCH: lower anchor belts.
47
LATCH: Lower
+
Top Tether
Install
Torso Position 1 or
2 Can Be Used
You may adjust to
Position 2
as your
child grows.
1
2
3
4
Raise Headrest All the
Way Up
Undo All Headrest Pad
Fasteners
Lift Up Headrest Pad
to Reveal the Forward-
Facing Belt Path
Pull the torso pad flap to the
side as shown to locate the
Forward-Facing Belt
Path.
Flip Seat Pad Forward to
Reveal Lower Anchor Belt
Remove the lower anchor
belt and connectors from the
storage location.
OR
If the lower anchor belt
was used for Rear-Facing
installation, remove it from
the
Rear-Facing Belt
Path.
continued on next page
48

Advertisement

Table of Contents
loading

Table of Contents