Reclining Car Seat; Changing Torso Position - Maxi-Cosi Magellan LiftFit Manual

Reclining Car Seat

This car seat has multiple positions.
On the base, there are labels that show
the recline positions you will need to use to
install this car seat in different modes.
Rear-Facing
Mode
blue
Use any
position that will
Rear-
make the
Facing Level Line
parallel with the
ground.
To Recline: Place one hand on the back of the car seat. With your
other hand, squeeze the recline handle. The car seat will rotate in
the base. Release the recline handle to lock the car seat into place.
For More Upright: Place one hand on the back of the car seat.
With your other hand, squeeze the recline handle and pull the top
of the car seat forward. Release the recline handle to lock the car
17
seat into place.
Forward-Facing Booster Seat
Mode Mode
red
Use the Use either
position. positions that will
make the back of
the car seat as
flush against the
vehicle seat back as
possible.
This car seat has an adjustable torso.
Rear-Facing
Mode
Purple
Position 1
To Change Positions:
Push the torso adjustment buttons in on both sides of the car seat
while sliding the adjustable torso up or down.
Release the buttons to lock the torso in place. Hold the sides of the
torso and move it up and down to make sure it is securely locked
into place.

Changing Torso Position

Forward-Facing
Mode
Position 1
or Position 2
You may adjust to
Position 2 as your
child grows.
Booster Seat
Mode
Position 3
18