Vehicle Belts - Maxi-Cosi Magellan LiftFit Manual

Vehicle Belts

Your vehicle's features may be considerably different
than those pictured here.
If lower anchors are not an option or if your child weighs more than
Rear-Facing
35 lb (15.9 kg) for
Facing, you MUST use the vehicle seat belt system to install the car
seat.
Not all vehicle belts and seating positions will work with car
seats.
Please go through the following steps to understand how to
lock a car seat in Rear-Facing
vehicle belt.
1
21
Forward-
or 40 lb (18 kg) for
or Forward-Facing mode with a
You MUST Review Your
Vehicle Owner's Manual
Your vehicle owner's manual will let
you know which vehicle belts and
seating positions car seats can be
installed in.
Check How This Car Seat
2
Will Be Locked Into Place
The vehicle belt MUST NOT
loosen after tightening. This
means there needs to be a way to
lock the vehicle belt.
The ways this can be done are:
• By using this car seat's built-in AutoLock (see step 3); OR
• By using the seat belt's retractor (see step 4); OR
• By using the seat belt's latch plate (see step 5).
The AutoLock
3
When used correctly, this car
seat's AutoLock will lock the
vehicle belt.
Please go to the correct vehicle
Rear-Facing
belt installation section of the
AutoLock
manual to learn how to properly
use this feature.
Rear-Facing Vehicle Belt Install: page 28
Forward-Facing Vehicle Belt + Tether Install: page 40
If you do not use this feature, you MUST lock the vehicle belt
using the retractor or the latch plate. Continue to step 4.
Check Retractor
4
Retractors pull seat belts into
stored positions and lock the belt
to hold passengers in place.
See the next page for some
common types of vehicle belt
retractors that will work with this
car seat. 22
continued on next page