Maxi-Cosi Magellan LiftFit Manual page 19

All-in-one car seat
Table of Contents

Advertisement

6
7
8
31
Tighten Belt
• Place your hand in the car
seat.
• Firmly push the car seat
down and towards the
vehicle seat back.
• Pull the shoulder belt (or
the free end of the lap belt)
parallel with the belt path
as shown.
Go to Side of Car Seat
That Does Not Have
Vehicle Buckle
No Vehicle Buckle
Locate AutoLock
Slide only the shoulder
portion of the belt up through
the AutoLock as shown.
Pull it up until you cannot pull
it any farther.
Shoulder Belt
Fully threaded into
AutoLock as shown.
Lap Belt
Lays below the bottom
notch as shown.
9
If it moves more than 1 in. (2.5 cm), you can try:
• Tightening the belt more; OR
• Reinstalling the car seat; OR
• Changing to a different seating location; OR
• Switching to LATCH: lower anchor belt installation. See
page 34.
10
Check Belt Tightness
• Hold the car seat ONLY at
the belt path with your
non-dominant hand.
• Push and pull the car seat
from side to side.
• The car seat should not move
more than 1 in. (2.5 cm).
Secure Child in Car Seat
To properly secure your child in
the car seat, see pages 53-55.
Check your child's fit often and
make any needed adjustments
to the car seat as they grow.
continued on next page
32

Advertisement

Table of Contents
loading

Table of Contents