Latch: Lower Anchor Install With Base - Maxi-Cosi Mico Max 30 Instructions Manual

LATCH: Lower Anchor Install
45
with Base
Before you begin installing the seat
into your vehicle, did you check:
Your child's weight and height?
See page 7.
Your child's fi t? See page 10.
Do you need to make adjustments to the
harness height or the buckle position?
1
Remove Lower Anchor Belt
from Storage Location
Unhook the lower anchor
connectors from the base by
pressing the red release button
on each connector.
2
Loosen Lower Anchor Belt
Only 1 connector has an adjuster.
Push the adjuster's button and
pull the belt to loosen.
3
Route Lower Anchor Belt
Through Base Belt Path
The LATCH: lower anchor belt
adjuster must be on the right
side of the base as shown.
Adjuster
Do not twist belt.
4 Place Base in Vehicle
Center the base in the chosen
seating position as shown.
continued on next page
46