Changing Buckle Position For Smaller Infants - Maxi-Cosi Magellan LiftFit Manual

6
7
1
2
3
retainer into the same slot as the buckle cover. The
buckle MUST face out.
8
9
Check your child's fit often. If you cannot achieve a snug
harness fit for your child, see page 16.
To learn how to check harness tightness, see pages 53-55.
WARNING:
Failure to place buckle's metal retainer completely through the
15 pad and the car seat can result in serious injury or death.
From Top of Car Seat,
Pull Buckle and Buckle
Cover Out of Car Seat &
1
Pad
2
3
Slide Buckle Cover into
Chosen Slot in Pad
The buckle cover only goes
1
through the slot in the pad.
2
It lays flat underneath the pad.
3
Insert the buckle's metal
1
Pull Buckle's Metal
2
Retainer Completely
3
Through Pad & Car Seat
Check Buckle
Pull the buckle up to make sure
it is secured.
The buckle MUST NOT pull out.
Changing Buckle Position
If you cannot achieve a snug harness fit for your infant,
1
make these adjustments.
2
3
1
1
2
3
2
1
2
3
3
4
Failure to place buckle's metal retainer completely through the
pad and the car seat can result in serious injury or death.
for Smaller Infants
1
2
3
With Buckle in the 1st Slot
As Shown, Pull Up Front of
1
Seat Pad
2
If you need to move the buckle to
3
the 1st slot, see pages 14-15.
From Bottom of Car Seat,
Pull Metal Retainer Towards
You and Push It Up into
Middle Slot As Shown
From Top of Car Seat, Lift
Up Seat Pad Panel
Lay the metal retainer flat against
the car seat as shown.
Tuck Car Seat Pad Back
Around Front of Car Seat
& Check Buckle
Pull the buckle up to make sure
it is secured.
The buckle MUST NOT pull out.
WARNING:
1
2
3
16