Connecting The Scanner - Minolta QuickScan 35 User Manual

CONNECTING THE SCANNER

Before starting, turn the computer and all connected devices OFF.
If the QuickScan 35 Plus is the only or last item in the SCSI chain
Terminator
If the QuickScan 35 Plus will be the last or only device in your SCSI chain, plug the supplied terminator into
an open SCSI port on the back of the QuickScan 35 Plus. Either SCSI port can be used, there is no
dedicated IN or OUT port.
If Your PC Does Not Supply Power to the Terminator
If your PC does not supply power to the SCSI terminator, set the QuickScan's terminator power switch to
ON.
• Refer to your computer manual to determine if your PC supplies power to the terminator.
13
QuickScan35