S
CANNER SETUP
Before connecting the scanner to a computer
Before connecting the scanner to a computer, the DiMAGE Scan Utility must first be installed.
Read the software instruction manual for the installation procedure.
The scanner should be placed on a level surface free from vibrations. It should be located away
from direct sunlight and in a clean, dry, well-ventilated area.
The computer and all peripheral devices must be
off before connecting the scanner.
Connecting the USB cable
Remove the protective cap from the USB
port. Securely plug the A connector of the
USB cable into the scanner's USB port and
the B connector into the computer's USB
port.
The scanner should be connected directly to
the computer. Attaching the scanner to a
USB hub may prevent proper operation.
When the scanner is initially connected to a
computer with a Windows 98, 98SE, or 2000
Professional operating system, the found-
new-hardware wizard will appear briefly. No
action is required. With Windows 2000, the
"Digital Signature Not Found..." message
may appear. Click the yes button to com-
plete the scanner installation.
When the scanner is initially connected to a
computer with a Windows XP operating sys-
tem, the found-new-hardware wizard will
appear. Click the next button. The "not
passed Windows Logo testing" message
appears. Click the continue-anyway button
to complete the scanner installation.
8