Interface can not be Confirmed
If the computer cannot confirm interface because the QuickScan 35 Plus power is off or there is a problem
with the SCSI connection or the SCSI ID number, the following dialog box will appear. Correct the problem
and click on OK.
If the scanner detects that film is loaded, the following dialog box will appear. Click on OK and remove the
film.
If you switch to the utility software after using the TWAIN driver or vice versa, you will have to reinitialize the
scanner.
Reinitializing the TWAIN Control Software
Press control, shift, and I keys to reinitialize the scanner.
Reinitializing the QS35 Utility Software
Select Initialize from the File menu to reinitialize the scanner.
32
QuickScan 35