Before Connecting The Scanner To A Computer; Connecting The Usb Cable - Minolta DIMAGE SCAN ELITE 5400 Hardware Manual

Before connecting the scanner to a computer

Before connecting the scanner to a computer, the DiMAGE Scan Utility must first be
installed. Read the software instruction manual for the installation procedure.
The scanner should be placed on a level surface free from vibrations. It should be
located away from direct sunlight and in a clean, dry, well-ventilated area. Never connect the
scanner cable while data is being transferred between the computer and peripheral devices.

Connecting the USB cable

When the scanner is initially connected to a computer with a Windows 98, 98SE, or 2000
Professional operating system, the found-new-hardware wizard will appear briefly. No action is
required. With Windows 2000, the "Digital Signature Not Found..." message may appear. Click the
yes button to complete the scanner installation.
When the scanner is initially connected to a computer with a Windows XP operating system, the
found-new-hardware wizard will appear. Click the next button. The "not passed Windows Logo
testing" message appears. Click the continue-anyway button to complete the scanner installation.
8 Scanner setup
Securely plug the A connector of the USB cable into the scanner's USB
port and the B connector into the computer's USB port.
The scanner should be connected directly to the computer. Attaching the
scanner to a USB hub may prevent proper operation.