Minolta QuickScan 35 User Manual page 62

Saving the File
If you are using the TWAIN driver software:
Select Save As... from the File menu.
• The Save As dialog box will appear.
Enter the file name and the location to save the file to, then click on Save.
If you are using the Utility software:
The Windows Save dialog box will appear after the image is scanned. Enter the file name and
choose the location to save the file, then click on Save.
• Images scanned and saved using the QS Utility are saved in a PICT2 format.
Ejecting the Film
Eject the film after scanning and before turning the Quickscan off. Click on Eject to eject the film manually. If
the Auto Eject check box in the preference dialog box was selected, the film will automatically eject when
scanning is complete.
Do not remove the film holder from the scanner until it has been properly ejected.
Removing the film, changing the frame, and inserting the film again without ejecting the film properly will
cause image distortions.
Fluorescent Lamp Automatic Shut Off
The fluorescent light source automatically turns off if the PC has not been operated for two hours.
The lamp will come on again the next time you use the QuickScan.
Set-up will take about 30 to 60 seconds before the fluorescent lamp glows again.
62
QuickScan 35