Minolta QuickScan 35 User Manual page 52

3. Enter the final image size (Width and Height) in the Image Size Box or use the cropping frame.
• Use the Units pop-up menu to change the units of measure. Size can be entered in inches, centimeters,
points, or picas.
4. Click on the Lock check box to lock your final image size.
• Changing the scan pitch will not affect the standard mode settings unless the scanners limits have been
breached. If breached, the image dimensions will change to compensate.
• Click on Reset to return all settings to default position.
52
QuickScan 35