Connecting The Scanner - Minolta QUICKSCAN35 Instruction Manual

2. CONNECTING THE
SCANNER
11
1. Connect one end of the SCSI cable to one of the two SCSI
ports on the rear panel of the QuickScan 35 and the other end to
the SCSI port on the rear of the Macintosh.
2. If the QuickScan 35 is the sole SCSI device, insert the SCSI
terminator to the open port on the rear of the scanner.
∞ If another SCSI device is connected, refer to its instruction
manual.
3. Plug in one end of the power cord to the scanner's AC inlet
and the other end to an outlet.