Minolta QuickScan 35 User Manual page 25

Preference Dialog Box
Click on the preference button to display the preference dialog box. Here, you can select the desired color
correction mode and turn the Auto Brightness and Auto Eject functions on and off.
1
2
3
4
Curves Dialog Box
With the curves dialog box, you can control the brightness and color of the scanned image. Changes to all
curves are automatically applied to the image in the scanning window.
1. Standard Mode check box
In standard mode, the color balance, black level,
and brightness are adjusted with slider bars.
2. Professional Mode check box
In professional mode, the curves dialogue box and
histogram dialogue box give you precise image
correction capability.
3. Auto Brightness check box
Auto Brightness automatically compensates for the
density range of positive film. When scanning
underexposed color slides, select Auto Brightness
to obtain image data with suitable brightness
values. Auto Brightness is only effective when Color
Pos. has been selected in the Film Type pop-up
window.
4. Auto Eject check box
When selected, the film is automatically ejected
after the scanning operation is finished.
1. Master Tone Curve check box
2. R Tone Curve check box
3. G Tone Curve check box
1 4. B Tone Curve check box
5. Input level display
2
Displays the input level for the selected point on the
3
tone curve.
6. Output level display
4
Displays the output level for the selected point on
5
the tone curve.
6
7. Reset button
7
Click on the reset button to return to the curves to
their original settings.
8. Load button
Click on the load button to load previously saved
9 8
settings.
9. Save button
Click on the save button to save the settings
currently displayed in the curves dialog box.
25
QuickScan35