General Information; Purpose Of The Document; Using This Document; Intended Use - Webasto Next Operating And Installation Instructions

2 | General information

2 General information
For the latest version of this document, see: https://char-
ging.webasto.com/int/products/documentation
2.1

Purpose of the document

These operating and installation instructions are part of the
product and contain information for the user to ensure safe op-
eration and for the electrician to carry out safe installation of
the Webasto Next charging station. In addition to the "Import-
ant Information on Operating and Installation Instructions", a
printed version of which is enclosed with your product, this doc-
ument also contains detailed information about operating the
product.
2.2

Using this document

u Read these operating and installation instructions for safe
operation and installation of the Webasto Next.
Your "Important Information on Operating and Installation In-
structions", a printed version of which is enclosed with your
product, includes introductory information and information rel-
evant to safety and installation. This document additionally in-
cludes further information on the operation of the charging sta-
tion.
NOTE
We would draw your attention to the fact that, as part
of a professional installation, an installation log should
be drawn up by the installer. We also request that you
fill in our chapter 21, "Checklist for the installation of
the Webasto charging station" on page 22.
NOTE
Individuals with deficiency in their colour vision require
support in the allocation of all fault indicators.
2.3

Intended use

The Webasto Next charging station is designed for charging
electric vehicles in accordance with IEC 61851-1, charge mode
3.
In this charge mode, the charging station ensures:
l The voltage is not applied before the vehicle has been con-
nected correctly.
l The maximum power is calibrated.
2.4

Use of symbols and highlighting

DANGER
This signal word denotes a hazard with a high degree
of risk which, if not avoided, may lead to death or seri-
ous injury.
WARNING
This signal word denotes a hazard with a moderate de-
gree of risk which, if not avoided, may lead to minor or
moderate injury.
CAUTION
This signal word denotes a hazard with a low degree of
risk which, if not avoided, will lead to minor or moder-
ate injury.
NOTE
This signal word denotes a Special Technical Feature or
(if not observed) potential damage to the product.
Refers to separate documents which are enclosed or
can be requested from Webasto.
4 / 23
2.5

Warranty and liability

Webasto shall not assume liability for defects or damage that
are the result of the installation and operating instructions being
disregarded. This liability exclusion particularly applies for:
l Improper use.
l Repairs carried out by an electrician not contracted by
Webasto.
l Use of non-original spare parts.
l Unauthorised conversion of the unit without permission
from Webasto.
l Installation and commissioning by unqualified staff (not an
electrician).
l Improper disposal after decommissioning.
WARNING
Installation and connection of the charging station must
only be carried out by a qualified electrician.
The symbol of a bin with a line through it means that
the instructions in the chapter on Disposal must be fol-
lowed.
2.6

Software licences

This product contains open-source software. Further informa-
tion relating to this (disclaimer, written offers, licence informa-
tion) can be found via the integrated web server. The web
server can be reached via the hotspot (https://172.0.2.1/licens-
ing.html).
3

Safety

3.1 General information
The device must only be used in a technically faultless condition.
Any malfunctions that adversely affect the safety of persons or
of the device must be immediately rectified by a qualified elec-
trician in accordance with nationally applicable regulations.
3.2

General safety information

l Hazardous voltages are present within the casing.
l The charging station does not have its own main ON/
OFF switch. The protective devices installed in the
power supply system are therefore also used to dis-
connect the power supply.
l Check charging station for visual damage before use.
Do not use the charging station if damaged.
l Installation, electrical connection and initial operation
of the charging station must only be carried out by an
electrician.
l Do not remove the cover of the installation area whilst
in operation.
l Do not remove markings, warning symbols and the
type label from the charging station.
l The charging cable must only be replaced by an electri-
cian in accordance with the installation instructions.
l It is strictly prohibited to connect other equipment/
devices to the charging station.
l Make sure that the charging cable and coupling can-
not be driven over, trapped and are protected from
any other hazards.
l Immediately notify Webasto Customer Service if the
charging station, charging cable or the charging coup-
ling are damaged. Do not continue using the charging
station.
5111232C OI-II Webasto Next_EN