QMS 2060 Setup Manual page 9

Print system

Hide thumbs Also See for 2060:

The packing materials that protect your printer during shipment—

cardboard, polystyrene, tape, and shipping spacers—must be

removed before you can use the printer.

Use the following procedure to unpack the printer. To ensure that your

printer was not damaged during shipment, follow the entire procedure.

Note: Save the packing materials in case you ever have to move or

ship the printer to a new location.

Caution: To avoid damaging the printer, remove all packing materials

before turning it on.

Lift off the box and remove everything except the printer

from the shipping carton.

Use the carrying grips on the bottom of the left and right sides of

the printer.

Lift the printer out of the shipping carton.

WARNING! The printer weighs about 53 lbs (24 kg). Don't lift it by

yourself.

ACHTUNG! Der Drucker wiegt ca 24 kg; bitte versuchen Sie

niemals, das Gerät alleine anzuheben oder zu tragen.

Remove the protective plastic covering, and then remove

any tape and polystyrene from the printer body.

Note: Make sure all of the polystyrene is removed.

Remove the packing materials and tape from inside the

printer and cassette.

Slide the cassette into the printer.

Place the printer in its proper location.

2060 wx