QMS 2060 Setup Manual page 7

n
On a hard, level surface capable of supporting the 53 lb (24 kg)
printer. (By "level" we mean that the surface should be so flat—1°
or less slant—that you can lay a round pencil down on it, and it
doesn't roll in any direction.)
n
In an area with a temperature range of 50° - 95° F/10° - 35° C
(with temperature fluctuation of 10°) and relative humidity range
of 15% - 85% (with humidity fluctuation of 20°).
n
Away from cooling and heating sources, extreme temperature
changes, direct sunlight, excessive dust, corrosive chemicals or
vapors, water pipes, refrigerators, any strong electromagnetic
field (such as that created by an air conditioner), items that can
easily burn (such as a curtain), and excessive vibration. Don't
connect it to the same electrical outlet as noise-generating equip-
ment.
n
6 feet (1.8 meters) or less from your PC for a parallel connection.
n
Close to an easily accessible power supply.
n
In a well-ventilated room.
n
With enough space around
the printer to allow adequate
ventilation and easy servicing:
- Front
- Rear
- Left side
- Right side 12"/305 mm
36"/914 mm
12"/305 mm
12"/305 mm
5E@A 8EAM