QMS 2060 Setup Manual page 36

18 Close the Control Panel.
The QMS Network Print Monitor is now upgraded for all queues
using it.
19 Add the QMS Port as explained in the next section, "Add a
Print Device."
Before you can use the QMS Network Print Monitor to transport print
jobs to the printer and receive status information on them from the
printer, you must add the QMS port associated with the print device to
your system configuration.
1 From the Start menu, choose Settings.
2 Choose Printers.
3 In Printers window click the right mouse button.
4 In the Print Servers Properties dialog box select the Ports tab.
5 Choose the Add Port button.
6 Choose the Printer Ports button.
7 Select QMS Port from the list then choose OK.