QMS 2060 Setup Manual page 39

c Send request timeout
Sets the amount of time that the QMS Network Print Monitor
waits for a print job to be sent before it returns control to the
Microsoft Windows NT Print Spooler. Scroll through the list
box and select a value between 1 and 600 minutes. The
default is 60 minutes.
If this timeout
expires and the job
was sent via a...
NT Server
Workstation
7 Configure the events to log.
The following types of messages can be reported in the Applica-
tion Event Log. See your Microsoft Windows NT documentation
for details on this log.
a Errors
Enables error message reporting in the Application Event
Log. Click the Errors check box to enable error message
reporting. A clear check box disables error message report-
ing in the log.
b Warnings
Enables warning message reporting in the Application Event
Log. Click the Warnings check box to enable warning mes-
sage reporting. A clear check box disables warning message
reporting in the log.
This is what happens...
The print job is automatically terminated
and cleared from the system.
The Windows NT Print Spooler dialog box
displays, asking for a retry or cancel
response.
» Note: Regardless of your response, the
job is terminated and cleared from the
system.