QMS 2060 Setup Manual page 30

Print system

Hide thumbs Also See for 2060:

Note: On initial access to the Add QMS Port dialog box, whatever

you type in the Port Name text box is automatically copied to the

IP Address text box. The port name and IP address can be the

same or they can be different. However, If they are different, then

first click the cursor in the IP Address text box and type it. Then

click the cursor in the Port Name text box and type it.

Type the Internet Protocol Address for the port.

This address is either the unique host name or the dot notation

identifier of the network device.

Host Name

Dot Notation

Identifier

If an invalid or previously used IP address (host name or dot nota-

tion identifier) is given, the following message displays: The

port address "IP_Address" could not be resolved

on this computer. Accept it anyway?

Do one of the following:

Select No and type another valid IP address (this is what

QMS recommends).

Select Yes and add this address in the Network Host Name

file on you computer before you send any print jobs to the

port. If a print job is sent to the port before the address is

entered in the Network Host Name file, printing of the job

fails.

Select Cancel to abort adding the port and to exit from the

Add QMS Port dialog box.

10 Choose OK.

11 Choose Close in Printer Ports dialog box, then choose OK in

Print Server Properties to close the Printers dialog box.

A symbolic name that identifies a device. This name must

exist in your Network Host Name file and must be unique.

A unique set of four numbers, separated by periods,

which identifies a device on the internet (for example

191.45.105.227).

2060 wx