QMS 2060 Setup Manual page 20

Print system

Hide thumbs Also See for 2060:

Using a twisted-pair (RJ45) Ethernet

cable, connect the Ethernet port on the

printer to a 10BaseT concentrator.

If you're replacing a printer already con-

nected to an Ethernet network, you may

already have a twisted pair (RJ45) Ethernet

cable. If not, contact your QMS vendor or a

local computer store.

Also, see appendix B, "Technical Specifica-

tions," for detailed information on PC-to-

printer cabling.

Plug the printer into a grounded, surge-

protected, electrical outlet.

Windows 95 and the parallel port on the QMS 2060 WX both support

Plug and Play technology, which lets your PC and its attached devices

work together automatically. After you've connected the printer to the

PC and plugged it in, the correct printer driver is automatically

selected for you when you perform the following procedure.

Note: If you're using an Ethernet network connection, refer to the next

section, "Windows 95 (Ethernet Connections)," for information on

installing the printer driver.

If it's on, shut down your PC in the usual way.

Ethernet

Port

2060 wx