QMS 2060 Setup Manual page 24

Print system

Hide thumbs Also See for 2060:

Because Windows NT 4.0 doesn't support Plug and Play technology,

you must install the printer driver manually as follows.

Insert the QMS 2060 WX printer drivers disk or CD-ROM

(shipped with your printer) into the appropriate disk drive on

your PC.

In the Windows NT Start menu choose Settings.

In the Settings menu, choose Printers.

In the Printers window double-click the Add Printer icon.

The Add Printer Wizard opens.

When prompted, choose My Computer to identify how the

printer is attached to your workstation, and then choose

Next.

My Computer means Local Printer. This is the appropriate choice

whether you are connecting the printer directly to your computer

via the parallel port or to a network via the Ethernet port (in which

case you'll replace LPT1 with QMS Port when you install the

QMS Network Print Monitor in "Windows NT 3.51/4.0" on

page 29).

When prompted, select the appropriate port to use with the

printer, and then choose Next.

When prompted to select a manufacturer and model of

printer, choose Have Disk.

In the Install from Disk dialog box, type

drive :\

(where drive is the letter of the disk drive in which you inserted

the disk or CD-ROM in step 1), and choose OK.

QMS 2060 WX printer displays in the list box.

Select the QMS 2060 WX printer, and then choose Next.

2060 wx