QMS 2060 Setup Manual page 33

8 Configure the audible alert.
This setting enables the QMS Network Print Monitor's problem
alert sound. Click the Audible Alert check box to have the monitor
beep the system speaker when it encounters an error writing to
the QMS port. Clear the check box to disable the problem alert
sound.
9 Choose OK.
10 Close the Print Servers Properties dialog box.
Note: If you're using Windows 95, refer to the installation instructions
»
on page 23.
The QMS Network Print Monitor is installed on your Microsoft Win-
dows NT workstation or server. A setup script (MONITOR.INF) is pro-
vided on the QMS Network Print Monitor Windows disk or CD-ROM.
This file is also available electronically on the Internet, CompuServe,
and the QMS Bulletin Board. See appendix A, "QMS Customer Sup-
port," for access information.
There are two different methods for installing the QMS Network Print
Monitor, depending on whether you're performing a new installation or
upgrading an existing installation. Both methods are described here.
Use this procedure when installing the QMS Network Print Monitor for
the first time.
» Note: You must be logged on as a member of the Administrator group
to install the QMS Network Print Monitor. Also, the TCP/IP network
software must be installed.
1 Insert the QMS Print Monitor for Windows NT disk or CD-
ROM in the appropriate disk drive of your PC.
2 From the Start menu, choose Settings.
3 From the Settings menu, choose Printers.
—