QMS 2060 Setup Manual page 35

5 In the Print Servers Properties dialog box select the Ports
tab.
6 Type in the path where the MONITOR.INF file is located (for
example, a:\i386).
7 Press
displays.
8 Press
» Note: If an error box appears, choose OK.
9 Choose Cancel in the Printers Ports dialog box then choose
Cancel in the Print Servers Properties dialog box.
10 Close the Printers dialog box.
11 From the Start Menu, choose Settings.
12 Choose Control Panel to open it.
13 Choose the Services icon.
14 Highlight Spooler in the Services dialog box, and choose the
Stop button (located on the right side of the dialog box).
The following message displays:
Are You Sure You Want To Stop Spooler Service?
15 Choose Yes.
The Spooler status is set to blank, and the following message dis-
plays:
Attempting to stop the spooler service on username
16 Choose the Start button.
Spooler status is set to Started, and the following message dis-
plays:
Attempting to start the spooler service on username
17 In the Services dialog box choose the Close button.
or choose OK and the Select Port Monitor dialog box
or double-click QMS port under Port Monitor.