QMS 2060 Setup Manual page 25

10 If you're replacing an existing Windows NT 4.0 printer driver,
perform this step; otherwise, skip to step 11.
a When prompted, choose Replace Existing Driver, and then
choose Next.
» Note: If you're updating a currently installed QMS 2060 WX
on a Windows NT 4.0 station, always choose to replace the
existing driver. Otherwise, when you've finished the
installation, a second QMS 2060 WX icon, named "copy 2," is
displayed in the Printers window.
b When prompted, for a printer name, either accept the
displayed name or type a new one, and then choose Next.
11 When prompted for sharing information, choose either
Shared or Not Shared, and then choose Next.
n
If you chose Not Shared, skip to step 12.
n
If you chose Shared, provide the sharing information.
a
b
In the Share Name edit box, type the name of the printer.
This is the name displayed when your PC is connected to
the printer.
If you're sharing your printer with a Windows NT 4.0
workstation, choose OK and skip to step 12.
If you're sharing your printer with a Windows 95
workstation, in the Alternate Drivers list box, select the
Windows 95 operating system, and choose OK.
If the operating system on your PC does not have the
QMS 2060 WX printer driver for Windows 95, you'll be
prompted to install it: Insert the QMS 2060 WX printer
driver disk and choose OK.
The required files are copied to the appropriate directory.