Emerson Rosemount 3144P Reference Manual page 24

Installation
December 2019
Figure 2-11: Transmitter Terminal Block Wiring Connection
A. Sensor terminals (1–5)
B. Ground
Figure 2-12: Sensor Wiring Diagram for HART/4–20 mA
(1) (2)
(1) Transmitter must be configured for a 3-wire RTD in order to recognize an RTD with a
compensation loop.
(2) Emerson provides 4-wire sensors for all single-element RTDs. Use these RTDs in 2- or 3-wire
configurations by leaving the unneeded leads disconnected and insulated with electrical tape.
24
Wiring connection
"-"
"+"
Test
(with "T1" integral transient protection
A
"+"
"-"
B
Single-sensor connections
Dual-sensor connections
Reference Manual
00809-0100-4021
Wiring connection
option)
A
B
Rosemount 3144P