Emerson Rosemount 3144P Reference Manual page 21

Reference Manual
00809-0100-4021
The transmitter can be configured to output four of the six following digital process
variables:
• Sensor 1
• Sensor 2
• Differential temperature
• Average temperature
• First good temperature
• Transmitter terminal temperature
• Surface temperature (Rosemount X-well only)
The HART Tri-Loop reads the digital signal and outputs any or all of these variables into as
many as three separate 4–20 mA analog channels.
Refer to
to-Analog
Figure 2-9: HART Tri-Loop Installation Flowchart
(1) See Use with the HART Tri-Loop
Reference Manual
Figure 2-9 for basic installation information. Refer to the Rosemount 333 HART-
Reference Manual signal converter for complete installation information.
for configuration information.
December 2019
(1)
Installation
21