Emerson Rosemount 3144P Reference Manual page 151

Reference Manual
00809-0100-4021
Table 3-3: Field Communicator Error Warning Descriptions – HART
Message
Command not implemented
Communication error
Configuration memory not compatible with
connected device
Device busy
Device disconnected
Device write protected
Device write protected. Do you still want to shut
off?
Display value of variable on hot key menu?
Download data from configuration memory to
device
EEPROM Error
EEPROM Write Error
Exceed field width
Exceed precision
Ignore next 50 occurrences of status?
Illegal character
Illegal date
Illegal month
Illegal year
Reference Manual
HART Commissioning
Description
The connected device does not support this
function.
Either a device sends back a response indicating
that the message it received was unintelligible,
or the Field Communicator cannot understand
the response from the device.
The configuration stored in memory is
incompatible with the device to which a transfer
has been requested.
The connected device is busy performing
another task.
Device fails to respond to a command.
Device is in write-protect mode. Data can not be
written.
Device is in write-protect mode. Press YES to
turn the Field Communicator off and lose the
unsent data.e
Asks whether the value of the variable should be
displayed adjacent to its label on the hot key
menu if the item being added to the hot key
menu is a variable.
Prompts user to press SEND softkey to initiate a
memory to device transfer.
Reset the Device. If the error persists, the device
has failed. Contact a Rosemount Service Center.
Reset the Device. If the error persists, the device
has failed. Contact a Rosemount Service Center.
Indicates that the field width for the current
arithmetic variable exceeds the device-specified
description edit format.
Indicates that the precision for the current
arithmetic variable exceeds the device-specified
description edit format.
Asked after displaying device status. Softkey
answer determines whether next 50
occurrences of device status will be ignored or
displayed.
An invalid character for the variable type was
entered.
The day portion of the date is invalid.
The month portion of the date is invalid.
The year portion of the date is invalid.
December 2019
(continued)
151