Supervisor Password; User Password; Ide Hdd Auto Detection - DTK PRM-92V User Manual

High performance pentium ii/iii mainboard

Table of Contents

as "EPP" or "ECP+EPP" option.

4.11 SUPERVISOR PASSWORD

Two level of password is supported. Depending on the setting of the "Security

Option" in the "BIOS FEATURES SETUP", the system BIOS will ask for

password every time booting up the System or entering BIOS Setup. With the

supervisor password, both the system booting and BIOS setup changing is allowed.

This main menu item lets the user to set up the Supervisor Password.

Change the password as follows:

Choose "PASSWORD SETTING" in the Main Menu and press <Enter>. The

following message appears:

Enter the Password and press <Enter>. The following message appears:

Important:

Keep a safe record of the new password.

password, the only way to access the system is to disconnect the

CMOS batteries and then re-enter the password.

With the user password, only booting up the system is accepted, but changing the

BIOS setup is not allowed.

When users can not find the Hard Disk information, it is very helpful to use this

option.

Choose this item and press <Enter>.

After couple seconds, the screen will appear the Hard Disk information

and following message:

"SELECT PRIMARY MASTER OPTION(N=SKIP): N"

"ENTER PASSWORD:"

"CONFIRM PASSWORD:"

Award BIOS Setup Guide

If forget or lose the

Table of Contents