Load Setup Defaults Menu; Supervisor Password - DTK PAM-0057V User Manual

chosen as "EPP" or "ECP/EPP" option.
4.8

LOAD SETUP DEFAULTS MENU

This Main Menu item uses the default setup values. Use this option as a diagnostic aid
if the system behaves erratically. Choose this item and the following message appears:
To use the Power-On defaults, change the prompt to "Y" and press <Enter>.
4.9

SUPERVISOR PASSWORD

Two level of password is supported. Depending on the setting of the "Security Option"
in the "BIOS FEATURES SETUP", the system BIOS will ask for password every
time booting up the System or entering BIOS Setup. With the supervisor password,
both the system booting and BIOS setup changing is allowed.
This main menu item lets the user to set up the Supervisor Password.
Change the password as follows:
1. Choose "PASSWORD SETTING" in the Main Menu and press <Enter>. The
following message appears:
2. Enter the Password and press <Enter>. The following message appears:
Important: Keep a safe record of the new password. If forget or lose the
password, the only way to access the system is to disconnect the
CMOS batteries and then re-enter the password.
"Load SETUP Defaults (Y/N)? N"
"ENTER PASSWORD:"
"CONFIRM PASSWORD:"
Award BIOS Setup Guide
37