7.7.2
Making the Connection At The ODU
The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure no power is connected to the 30/60 Mbps PIDU or present on the cable before
connecting the ODU.
Step 1: Assemble the cable as described
in 7.7.1
Issue 3.1, July 2006
Figure 18: RJ45 Pin Connection
Step 2: Insert the RJ45 connector making
sure that the locking tab snaps home
Page 41 of 162