About this guide
Important safety information
WARNING
To prevent loss of life or physical injury, observe the safety guidelines in
this section.
Power lines
Exercise extreme care when installing antennas near power lines.
Working at heights
Exercise extreme care when working at heights.
Grounding PTP-SYNC
In order to meet the safety requirements for deployment in Australia and New Zealand
(AS/NZS 60950-1), the PTP-SYNC unit, if deployed, must be grounded to a Protective
Ground in accordance with Local Electrical Regulations.
Powering down before servicing
Always power down and unplug the equipment before servicing.
Primary disconnect device
The main power supply is the primary disconnect device.
External cables
Safety may be compromised if outdoor rated cables are not used for connections that
will be exposed to the weather.
phn-1613_008v000 (Jun 2011)
PTP-SYNC Installation Guide
Page 4