7.7.2
Making the Connection at the ODU
The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure no power is connected to the PIDU Plus or present on the cable before connecting
the ODU.
Step 1: Assemble the cable as described in
Step 2: Insert the RJ45 connector making
5.7.1 above
sure that the locking tab snaps home
Step 4: Screw on the clamping nut and
Step 3: Screw in the body of the weather
tighten
proofing gland and tighten
Figure 20 - Connections at the ODU
54