Making The Ptp 500 Series Bridge Pidu Plus Connection At The Odu; Connecting The Pidu+ To The Odu - Motorola MOTOWI 4 User Manual

Installation

7.7.3 Making the PTP 500 Series Bridge PIDU Plus Connection At The ODU

The following procedure describes how connection is made at the ODU. It is often easier to carry
out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure that no power is connected to the PIDU Plus or present on the cable before connecting the
ODU.
Step 1: Assemble the cable Step 2: Insert the RJ45 connector making
as described in 5.7.1 above sure that the locking tab snaps home
Step 3: Screw in the body of the Step 4: Screw on the clamping nut and tighten
weather proofing gland and tighten (Do not over tighten – see Figure 19)
Figure 21 Connecting the PIDU+ to the ODU
51