Table of Contents
Advertisement
7.5
LEGAL DISCLAIMER
IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY INJURY TO ANY PERSONS OR
ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA CANOPY 30/60
MBPS BACKHAUL PRODUCT.
7.6
MOUNTING THE ODU
The ODU mounting bracket is designed to ease installation by fixing the bracket to the pole and
then bringing the ODU into position using a single bolt fixing. The ODU should be mounted
using the following steps ensuring that the cable entry is at the bottom:
The ODU mounting bracket is designed to work with poles with diameters in the range 50mm
(2") to 75mm (3").
Step 1: Mount the bracket to the pole.
Pole diameters of 25mm (1") to 50mm (2") can be accommodated by inverting the back of the
bracket as shown in
Figure 15: Mounting to pole diameters 25mm (1") to 50mm (2")
When adjustment is complete tighten all bolts to 14Nm (11lb ft).
Warning: Do not over tighten the bolts as bracket failure may occur.
The enclosure and mounting brackets of the 30/60 Mbps Backhaul product range are capable of
withstanding wind speeds up to 151mph (242kph). The installer should ensure that the structure
Issue 3.1, July 2006
S
Step 2: Mate the unit to the bracket
together and tighten the nut and bolt.
Page 38 of 162
Advertisement
Table of Contents
