Single Wheel Measurement - Ranger 3DP4100 Operation Manual

6.4.2 Single wheel measurement

If need to disassemble the tire during adjustment procedure, it doesn't
need to back to measurement screen after adjustment, only need to
choose "single wheel measurement" after click "adjustment function
menu" on adjustment screen. Elevate the measured wheel, re-measure
the wheel according to the indications on the screen.
Enter single wheel measurement screen, operator choose the wheel that
need to re-measured, click the corresponding wheel on the screen to
enter next step. Click close to exit.
Front left wheel button Front right wheel button
Rear left wheel button Rear right wheel button
80