Table of Contents
Advertisement
1. POSSIBLE CAUSE: Computer does not turn on, indicator on the camera
REASON: Outer power socket is not secure, or does not have power
connection.
Power button on the cabinet is either turned off or is not
receiving power.
Ensure that the electrical outlet is working by testing it with
another device.
2. POSSIBLE CAUSE: After equipment installation, there is smoking and
REASON: Connecting with industrial power (380V), will burn the power
supply. Computer also will be damaged under this situation.
SOLUTION: Ensure the voltage selection switch is set to match the power at
your location, before connection. You will need to change the
power supply if the above situation happens.
REASON: Connecting with industrial power (380V), will burn the power
supply. Computer also will be damaged under this situation.
SOLUTION: Change the computer power.
3. POSSIBLE CAUSE: Computer works, but camera beam doesn't have power. A demo version is played when running
CHECK: The indicator of power supply is bright, if it is not bright, pull out the main power plug from HUB
communication board and plug back in, then check if the indicator is bright.
REASON: If the indicator is still not bright, the power supply may not be working.
SOLUTION: Change the power supply.
POWER SUPPLY TROUBLESHOOTING
Outer Power Supply Troubleshooting
beam isn't bright.
burning smell in the cabinet when power is connected.
the 3D software program.
129
110 - 120
Advertisement
Table of Contents
