INSTALLING CLAMPS AND TARGETS
After all equipment has been set up, drive the vehicle onto the lift making sure the front wheels are centered with the
turntables. Verify pins of turntables are locked. Apply vehicle brakes and place wheel chocks on the rear tires to ensure
maximum safety. Install the wheel targets and clamps according to the pictures shown below.
CLAMPS
FRONT AND REAR TARGETS INSTALLATION
REAR TARGET INSTALLATION
Check clamps are installed on the wheel and turn the top knob to lock the wheel clamp. The claws of the wheel clamp
should be fixed on the external edge of the rim. To install the targets, insert the locating pin of the targets in the groove of
clamps and rotate the targets until they are tilted forward towards alignment cameras. Incline the targets about 5 degrees
forward in relation to the vehicle. Make sure targets are locked on the clamps.
PREPARATION BEFORE ALIGNMENT
FRONT TARGET
FRONT TARGET INSTALLATION
TARGET INCLINED
TOWARDS CAMERA
14
REAR TARGET