Table of Contents
Advertisement
Chapter 6 Adjustment
Operator need to enter adjustment function after "report before
adjustment". The adjustment procedure should be: Caster adjustment (if
operator made Caster measurement), rear wheels adjustment, front
wheels adjustment. If the operator skip Caster measurement, the
adjustment procedure should be: rear wheels adjustment, front wheels
adjustment. And it needs to adjust Camber first, then adjust Toe.
6.1 Adjustment widgets explanation
3D software adjustment widgets divided as "pointer type of oil gauge"
and "digital type". Adjustment screen will display the adjustable
information by ruler, number, pointer and color.
It displays the minimum and maximum value of standard value under
the ruler. The dynamic value above the ruler is the current measuring
data. The display area color represents the relationship between the
dynamic value and standard value. Red color means the measuring data
is out of standard vehicle specification range, so need to adjust. Green
color means the measuring data within the standard specification range.
67
Advertisement
Table of Contents
