Table of Contents
Advertisement
Automatic version 3D alignment can click "trace targets automatically"
button to let the system adjust the targets view field position
automatically, or click "trace targets manually" button to choose
keyboard or press key to adjust camera beam height to adjust the
targets view field position.
8.2.1.2 Calibration step 1
After trace targets successfully, enter next step to "RCP" screen.
Operator need to move the right side of calibration bar forward about
300mm, left side keep the original position. Make sure the two targets
on the calibration bar are vertical to the ground, and prepare to
calibrate.
104
Advertisement
Table of Contents
