Table of Contents
Advertisement
right camera's lens view range.
Turn off power of
camera
reconnect
8.3.2 Camera Test
This function serves mainly to test and adjust the image effect, gray value range of front and rear
targets, and also to adjust LED brightness.
Gain Adjustment: Adjusts the light sensitivity of camera chip.
Exposure Time Adjustment: The measurement precision maybe affected if the working environment
lighting is too bright or too dark due to the dots of targets brightness will change. Operator can adjust
targets image brightness by adjusting exposure time. Also, can click "claculate exposure time auto-
matically" to adjust automatically.
Gray Value: Represents the brightness of targets. System requires the brightness range is 210-255.
Led Board Voltage: Operator can adjust LED brightness by adjusting the voltage of LED.
and
Recognize target image
Gray value of targets
119
Targets status
Advertisement
Table of Contents
