Table of Contents
Advertisement
POSSIBLE CAUSE: Messages will appear on the screen if there is a problem with camera connection.
REASON: HUB communication board and camera connection
are loose or camera may be broken.
CHECK: If the camera USB connection of HUB communication
board is loose.
SOLUTION: Pull out and insert again.
POSSIBLE CAUSE: If there are any problems with the camera connection during measurement, messages will pop up
on the screen.
REASON: HUB communication board and camera connection
are loose or camera may be broken.
SOLUTION: Pull out and insert again.
CABLE CONNECTION TROUBLESHOOTING
Camera Connection Troubleshooting
130
Advertisement
Table of Contents
