Table of Contents
Advertisement
5.4.3 Super measurement
It must make sure the equipment make once TID after installation if
choose super measurement. Make sure the 4 claws of clamp stick to the
wheel rim very closely, or will affect measurement results. Otherwise,
this measurement way used for small working place that doesn't have
enough space to push the vehicle. We don't recommend customer
always use this way, because the measurement precision maybe not as
good as other measurement ways.
Operator choose "super measurement" item on "preparation before
measurement" screen. Then enter "preparation before super
measurement" screen, the operator must prepare according to the
indications on the screen. See below photo for reference.
39
Advertisement
Table of Contents
